Kaiser Fototechnik 3250 Datasheet download pdf (Page 6)

TWINLINK T2D:

A Combined

Radio Frequency

and Infrared

Flash Trigger

Set comprising transmitter and receiver for wire-

less triggering of studio and camera flashguns.

Simultaneous triggering via 2.4 GHz radio fre-

quency and infrared signals using eight high per-

formance LEDs. 16 user selectable channels.

Transmitter and receiver with LED panels that can

be illuminated and external aerials. Automatic

power cut-down after pre-determined time.

Transmitter can be attached using the camera's

hot shoe or with an adhesive accessory shoe

mount in a convenient location. Receiver with tri-

pod thread and mounting magnets for attachment

• two simultaneous triggering

sig nals for high operational

reliability

•

for studio and camera flash

systems

Product survey

6140 TwinLink T2D

Receiver and transmitter. Includes

2 aerials, PC cable, 2.5/3.5 receiver

cable, 3.5/6.3 adapter plug, adhesive

accessory shoe, adhesive metal

plate, AC power adapter, 3 AAA

batteries, 2 CR 2032 batteries,

receiver fixture clip

6141 TwinLink T2RxD

Additional receiver for TwinLink T2D

6138 TwinLink T100A

Radio-controlled flash trigger for

com pact studio flashes, transmitter

and receiver, 2.5-3.5 release cable,

3.5-6.3 adapter plug, adhesive acces -

sory shoe base, adhesive metal plate,

CR 2032 battery, receiver fixture clip

6139 TwinLink T100RxA

Additional receiver for TwinLink

T100A

- Max working range: approx. 50 m (165 ft.)

indoors, approx. 200 m (660 ft.) outdoors.

- Max. sync. speed: 1/250 sec. (depending on

camera and flash)

- Batteries: Transmitter: 2x CR 2032, receiver:

3 x AAA (primary or rechargeable)

- External power supply: Mains adapter/charger for

receiver only (will also charge rechargeables).

- Dimensions: Transmitter: 40 x 68 x 35 mm

(1.6 x 2.7 x 1.4 in.), Receiver: 50 x 80 x 25 mm

(2 x 3.1 x 1 in.)

- Weight: Transmitter: 35 g (1.2 oz.), Receiver: 53 g

(1.9 oz.)

TWINLINK T100A:

The 2.4 GHz RC Wireless

Flash Trigger for Studio Flashes

on metal surfaces or via an adhesive metal plate sup-

plied with the set. Receiver has a hot shoe and trig-

ger cable terminals for PC and 2.5 mm jack-plug.

Battery or mains operation.

• Receiver uses AC mains power supply

• 16 channels for interference-free operation

Set comprising transmitter and receiver for wireless

triggering of compact studio flashes. Receiver uses

AC mains power supply via the flash unit’s mains

lead. 16 channel support.

Transmitter and receiver use external aerials.

The transmitter can either be mounted directly to

the camera hot shoe or may be positioned in an

alternative location using an adhesive hot shoe

mount supplied with the unit. The receiver can be

easily mounted on metal surfaces using a magnetic

adapter or just freely suspended on the mains

cable. 2.5 jack and PC connectors for release cable.

- Working range: indoor: approx. 30 m

(100 ft.) outdoor: approx. 70 m (230 ft.)

- Max. sync speed: 1/250 sec. (depending

on camera and flash)

- Battery (transmitter): 2x CR 2032 (3V)

Operating voltage (receiver): 110-240 volt

- Dimensions: Transmitter: 28 x 51 x

25 mm (1.1 x 2 x 1 in.), Receiver:

46 x 76 x 34 mm (1.8 x 3 x 1.3 in.)

- Weight: Transmitter: 12 g (0.4 oz.),

Receiver: 60 g (2.1 oz.)

NEW

More to

Release!

9079_DigitalZub_GB_0910_DigitalZub_9079_GB_0910 09.09.10 18:29 Seite 6

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

Comments to this Manuals

No comments

Kaiser Fototechnik 3250 Datasheet Page 6

Comments to this Manuals